Homa A Series Impeller Change Manual de usuario

Busca en linea o descarga Manual de usuario para Zapatillas Homa A Series Impeller Change. HOMA A Series Impeller Change User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Publication
88FN2020
Please Contact
Technical Support At 203
-
736
-
8890 With Any Additional Questions
Please Be Prepared To Provide Pump Serial Number During Call
Page
1 of 2
A Series Impeller
Change
This procedure outlines the requirements for changing an A Impeller. All decontamination and
safety procedures outlined in the IOM must be employed.
You Will Need:
2 pry bars of appropriate size
Dead blow hammer w/ non marring surface
#262 Red locking compound
#242 Blue locking compound
½” Drive Torque wrench (with appropriate torque range)
½” Ratchet with 8” Extension bar
½” drive 17mm, 14mm, 10mm, 8mm hex head sockets
optionally, items below
3/8” Drive ratchet
3/8” Drive 10mm and 8mm hex head sockets
3/8” Drive torque wrench
Before proceeding with disassembly, match mark the volute and pump body to aid in
reassembly.
With pump in a horizontal position, remove volute bolts. With suitable lifting device, lift
the motor and impeller from the volute.
For ease in handling and removal of the impeller, lay the assembly on its side and block
the motor from rolling.
With motor and impeller removed inspect the volute wear-ring and replace if
necessary. Instructions for replacement will be provided with the new wear-ring.
Lock impeller with a pry bar or a suitable length of 2x4 wood inserted into impeller vane
in such a manner as to prevent impeller from turning.
Vista de pagina 0
1 2

Indice de contenidos

Pagina 1 - A Series Impeller

Publication 88FN2020 Please Contact Technical Support At 203-736-8890 With Any Additional Questions Please Be Prepared To Provide Pump Serial Number

Pagina 2

Publication 88FN2020 Please Contact Technical Support At 203-736-8890 With Any Additional Questions Please Be Prepared To Provide Pump Serial Number

Comentarios a estos manuales

Sin comentarios